Bricks LA Update (Part 2)

The master life clock (no, not that life clock) is counting down to Bricks LA and there will be no extension, there will be no mercy for the tardy. If I don’t finish the diorama in time for the convention those microscopic charges lodged in my neck are going to blow, and open up both of my arteries.  At the time of this posting my watch is reading 27:18:40:19 and I’m starting to experience the horrible tyranny of the clock.  While I have no doubt that I’ll be able to achieve my primary goal of covering the table in an interesting way for the cronies to decorate, the jury is still out concerning how good it will actually be.   I started a list of things that I’d like to revise but quickly trashed it because it contained every major feature of the diorama.  The only way is forward, at least for now, I’ll look back later with a critical eye if I have the luxury of time for revision.   27 days and change may seem like a decent interval to work with, but once you mix in the business of the holidays and a little traveling there is not much time for building at all.


As you can see in the photo below, the cliff-line has doubled in height since the last update and now features a narrow staircase in the back.  The scene really needed a transition between the layers and it creates another interesting space for to give the minifigs a sense of motion.   While I like the idea of two distinct zones within the layout, I don’t want them to be completely isolated either. I considered building a ramp or small road instead of the stairs to accommodate small vehicles but it changed the frontier vibe too much.

I’m not sure I made the right call with the placement of the staircase and if I have time for one of those major revisions I mentioned earlier, I might relocate the whole thing closer to the viewer.  Where it sits now it’s actually very difficult to see from the front of the table.   Most of the attendees on public days are kids and as much as I’d like to say I don’t care about the audience, it would be cool if the kids could actually see what’s going on.  It doesn’t help matters that the table I’m bringing with me is a good bit taller than the standard convention folding variety.  That’s not going to change though, I’ve grown quite fond of my setup and it’s ease of transport. I guess the stairs will be a bonus detail for the cronies who end up hanging out behind the project as they inevitably do in these situations.  Experience tells me that there will be at lest two or three guys sitting back there eating sandwiches and consuming various beverages at any given moment.


I’ve just recently borrowed more of those sweet corner tiles that you see in use near the base of the staircase, so I’ll go back and add those along with some jumper plates so the minifigs don’t slide around so much.  I’m also not completely sold on using dark gray for the steps of the staircase, it might benefit from a contrasting color to make things a little more visible.   I considered using the same sand-green 1×2 plates you see at the top of the plateau, or maybe more dark tan if I have enough.

In the dozen or so conventions I’ve attended over the years I’ve never seen a MOC card design that I liked, they always seem intrusive where dioramas are concerned and just too flimsy.  I think they work best with small stand-alone models but even then they can look odd, out of scale or distracting and sometimes because of sloppy placement they don’t communicate the information effectively either.  Why spend time and effort to create a scene just to drop a folded piece of paper on top? With that in mind I decided to build the MOC card into the left hand corner of the cliff.  As of now we don’t have even a working title for the project so I left the top lines blank.  The provisional focus of the action is going to be a sort of back-woods sci-fi wedding, where  a myriad of human and alien contingents converge on this desolate frontier location to witness the secret nuptials.  If you have any suggestions for a suitable title don’t hesitate to express yourself in the comments.

As you can see I’ve moved the Garvey to the back corner of the plateau, where I intend to use it as an eye-block for the minifig wedding action in the fore-ground.  To further serve the narrative I’m going to switch the hatch & ramp feature to the opposite side of the ship and have the bride and her father walking down said ramp to the assembled throng of alien tribes waiting for the ceremony.  I could leave it the way it is now and simply turn the ship around, but I also want the flag of Ghana to be visible to the viewer because it’s one of the ships best features. If nothing else it’s a good opportunity to take advantage of the ship’s modularity, and the switch-out shouldn’t take too long (fingers crossed).  This is likely not the Garvey’s final position either, I may straighten it out completely and have it run along the back edge, it all depends on how Zach’s new freighter will fit into the picture, and how much space is left over.  I don’t want to create too much unusable land behind the Garvey, as whatever I put in that awkward triangular space will be largely invisible to the viewer unless I make something rather deliberately tall.  While envisioned as a solo venture, this project has morphed into a collabo and as a result the focus has shifted away from the Garvey and it’s ultimate placement will reflect that.

And finally there is the matter of the cave.  I’m not sure what’s going on there yet, how far back it will ultimately go or what the minifig action will be.  For now it is slowly developing at it’s own pace along with the rest of the model.  I tend to work on it when I’m bored of the repetitive plate and slope stacking.  There is certainly enough potential room down there for a good sized tunnel or additional chambers, or maybe even a road or railway.  Because the roof of the cave is so low, it’s difficult to see back very far, so I’m hesitant to put too much effort into that area which (like the staircase) will likely not be seen by most viewers. Just like the cliff wall, it seems intuitive that there should be some transition to the surface, so I’d imagine another rough hewn staircase would be in order.  I’m also not sure about the color of the cave floor, something with better contrast might be in order.  This area also seems like the best opportunity to include some lighting elements.  No matter what the final look and function of the cave is, at least the kids will have the best view for this particular detail.  With that in mind it might be a good chance to inject some comedy into the proceedings.

I’m not authorized yet to show the pictures, but Jeff is working on a sort of flat-bed hover tow-truck thing and Andrew Lee is working on a biker gang.  Brendan Mauro has jumped in on the action to contribute a cool parabolic satellite dish and hopefully some other details if he has the time. As for rowntRee, he has his own fish to fry but I’m still hopeful he’ll come up with something for the party before all is said and done.  And Rutherford….well he’s more worried about crafting a presentation for the convention than contributing to the diorama. But that’s to be expected really, Mike is more into talking about building than actually building.

Unrelated, I just noticed that Miro Dudas is attending the con so there is a decent chance of having 4 SHIPtember offerings in the house, which I’m sure you’ll agree is pretty damn cool.

I’ll close with yet another invitation for you, constant reader, to join us at Bricks LA when the master life clock reaches zero.  If you find yourself in the greater Los Angeles area the weekend of January 5th, 2018, you should swing by the Pasadena convention center and introduce yourself.  We’ll have SWAG and beverages and you can tell Rutherford in person what a terrible gas-bag he is.

17 thoughts on “Bricks LA Update (Part 2)

    1. I can’t read about or even think of Muscle Shoals without hearing Lynyrd Skynrd in my head. Why did yo do that to me Ted? I’m starting to think you don’t like me very much. I reluctantly appreciate the suggestion but this is supposed to be an alien planet, not sweet home Alabama…Ted.


  1. Lookin’ spiffy!

    I finally got a good day’s build on the pit stall, I’m actually a bit shocked at how well it’s agreeing with me. It’ll be 4 baseplates wide and 3 deep, should be about six bricks tall overall. Basically a landing pad sort of thingy, just really big. Been working on primary sponsorship for the VV and it’s making me laugh, so I must be doing something right. When I get time, I’ll post a WIP. sans VV.


    1. Cheers rountRee, whenever you want in on the spiffy action, you just say the word brother. Glad to hear you made some progress on the pit, I’ll be doing another update at the end of the week, so if you have anything to share with the readers, shoot me some photos. Not sure how to feel about you laughing…all alone in your basement Legoratory….


  2. The big brown area in the front right corner. Is that where all the collab contributions are going? I’m feeling like there’s opportunity there, perhaps a plateau like this:

    That would give some verticality (which, honestly, this dio really needs). I do think you’d benefit from some height, even if it’s just covered in grass. But a wedding photographer flying his drone from there would be pretty cool too…

    Whichever way this goes, I’ll be drooling for the next installment. And even though I’m close enough to theoretically travel to the con, I will have to throw in the towel for the next couple years until I own myself again. Currently enslaved to the friendly local education ogre. Just promise me you’ll still be doing collabs when I get out, because I am literally itching to get in on the action. Cheers, you’re doing great.


    1. I like your line of thinking, a little Monument Valley or Devil’s Tower vibe would be just about right for this diorama and I agree that the whole thing would benefit from a little vertical action. Once you get the ships in place I’m a little wary of rapid changes in height though, as many layouts (especially town layouts) suffer from selective compression where a ‘mountain’ ends up looking more like a hill once you get man-made buildings or vehicles in the scene for scale. I’ll give it some serious thought though, once I get the plateau on the opposite side done. As you suggest I’ll definitely be adding some plants, I’m just hesitant to put them out too early because they tend to attract the cats and that always ends with chewed up Lego scattered to every corner of the house.

      As for future collaborations, when you make your escape from the ivory towers of academia, I’m sure there will be something going on and we’ll always have a spot for you. I figure I’ve got at least another decade to go before it will feel awkward to still be dragging dioramas around the convention circuit. I just can’t picture myself as a 60 yr old dude still doing this, and that’s about the time I plan on embarking on a life of crime. I’m not going out in a rest home with tubes sticking out of me, I’d rather go down in a hail of gunfire outside a bank.

      Thanks for the feedback, I’m starting to think these LA updates are boring to the readers as evidenced by the lack of commentary, so it’s good to have somebody chime in on the action besides rountRee and Rutherford.


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s