Bricks LA Update (Part 1)

It’s been two weeks and a day since I committed to attending Bricks LA, and as I mentioned in this self congratulatory post, I’ve begun work on a diorama to share with my fellow attendees and the great unwashed masses who will pack the Pasadena Convention center in desperate search of a Lego fix.  I can hear the familiar questions now…is this Star Wars?  Is this Halo?  How long did it take?, How many bricks?, Do you live in your parent’s basement?,  are you sure this isn’t Star Wars?  As I mentioned in the first article, I’m planning on taking advantage of my SHIPtember offering from earlier this year, the BSL Marcus Garvey and use it as the centerpiece of the diorama.  I don’t typically keep models assembled for any length of time and one of the downsides of that policy is that I don’t have a catalogue of creations to draw from in an “emergency”.  I have managed to amass a decent sized collection of models by a rogues gallery of fellow builders, but I’m hesitant to use them for several reasons.  The most obvious one is that with very few exceptions the models in question have been previously posted and unlike Rutherford I don’t really dig trotting out a reliquary of greatest hits.   And of course, most of them don’t really fit the vibe of this current project. The Garvey is only a couple of months old and it’s never traveled to a convention so I figured it’s fair game.

Because experience has taught me that people are not really into my smaller builds (for better or worse they expect me to show up with the big action), I’m planning on a 4’x8′ layout that encompasses the entirety of my Legoratory table.  It’s the same footprint as Bucharest, Logan’s Run and Zero Hour but this new effort will certainly lack the vertical impact of those dioramas.   When your starting point is a 132 long ship, you need a large background to give it any sense of scale and perspective.

As of the time of this posting, I have a barely adequate 37 days and 35 minutes remaining to accomplish this task and for that…I must unfortunately embrace the boilerplate wholeheartedly.  That means there is no time for fussing about trying to come up with a new fancy technique or waiting patiently for artistic inspiration to strike…like lightning!  There is no time to conjure the muse, she’s a capricious wench at the best of times.  No, building under the guillotine of a hard deadline means reaching into the back-catalog of ideas and hopefully rearranging them into something that at least vaguely resembles a new build.  If something truly creative or original happens along the way, so much the better but the fundamental approach is different without the luxury of unlimited time.

Boilerplate.jpg

When building a diorama for a SHIP, you basically have two options for the setting, rural or urban.  Sure you can mix the two but in my experience one style is usually dominant.  I’m kind of burned out on the classic futuristic hangar approach or some kind of techno-ziggurat so I opted for a more natural setting.  I’ve amassed a decent quantity of dark blue tile over the past few years and I was itching to put them into use.  It made sense to start from the lowest point and build my way up (unlike my usual random approach to building things) so I tried to work in a subtle curve into the flow and break things up with little islands of mud.  Normally I’d at least try to break the grid and float some terrain at odd angles but in this particular instance, the baseplate is my friend. Things can get alarmingly jostled during interstate travel and I want to give the layout the best possible chance of survival on it’s way to the venue.

I wish I had enough dark brown to line the lower banks with, but looking at what I have on hand, a combination of old/new brown was the most logical choice.  I’m not ruling out a Cracklink order but I’d like to avoid it if I can, to save money for other things like SWAG and on-site refreshments.  After the mud went down, it was time to get a little elevation into the mix, so I began work on a rocky terrace.  I’m not a huge fan of your standard issue rock-vomit that features slopes going every which direction so I opted for this simpler one-direction technique I’ve used a couple of times in the past to good effect.  it’s not very inventive and certainly not state o’ the art, but I enjoy the look and it has the benefit of allowing me to gain elevation quickly.  As I mentioned earlier, I’ll be happy just to cover the entire footprint and I’m not terribly worried about the vertical aspect of the diorama.  In a normal situation, planning for an eye-block would be of primary importance in these early stages, but I’m just going to let it emerge on it’s own as the project advances.  I did begin an olive green retaining wall in the background, with small gaps between the slats, but I’m not convinced yet that it will still be around by the time the building is complete.  I might take advantage of the gaps by putting some indirect lighting behind the wall, but it’s just a vague notion for now.

Diorama.jpg

There has been one alarming development, in laying all that brown plate for the terraforming, I was amazed at how many 1×2 plates snapped like the bones of a brittle old man with osteoporosis.  The photo below is just a small sample of the carnage, I’d conservatively estimate that I lost 25-30 of these basic parts over the course of decidedly routine usage.  They were all of the newer reddish brown variety, I don’t think I lost a single example of the older color.  It’s disappointing, not because of the cost (they go for about 2 cents a pop), but rather because I expect a higher quality standard from our benevolent Danish overlords.

shattered.jpg

The biggest challenge I face with this project is a familiar one for me; the lack of an overriding creative vision to guide me.  Simply put, I have no freaking idea what this thing will, or should look like when all is said and done.  I know I want to use the bulk of the SHIP to divide the scene into two separate areas, each with it’s own character.  I know I want a largely rural setting, and some lights and motion…but what the final form will look like is a largely a mystery and so is the story that will go along with it.  Instead of planning like a normal person, I started laying brick without a guiding blueprint.  This isn’t unusual for me, I typically start blazing away in the heat of inspiration and worry about the details later, safe in the knowledge that I have the luxury of time for a re-start or two along the way to get things right.  I have no such luxury for Bricks LA, the reset button is broken and I have to push past indecision and uncertainty to make the deadline.

When I started building I didn’t envision this project as a collaboration, it seemed rude to ask people to spend time and effort building something in a creative vacuum, without a clear picture of the target to inform their work.  Building for a convention is a unique monster though and it has been my experience that involving cronies in the mix is essential to the collective onsite experience.  Things are always better with like minded idiots.  With that in mind, I’ve asked friends of the blog and WackLUG members Jeff Cross and Andrew Lee to come along for the ride if this WIP shot looks at all compelling to them. I’m also hoping Zach Clapsaddle will defy the odds and show up, bringing along  his special brand of magic, but that seems to be up in the air for now.  As for rowntRee, he’s (of course) invited to participate but he’s got his own kettle o’ fish to deal with, working on a racing pit for his engorged Victor Viper.  I hope it all fits in the van, buddy.

If, by chance, you find yourself planning on attending Bricks LA, let me know and I’m sure I can find some pace on this bloated layout for your contribution as well.   I’ll update you on the progress in the coming weeks.  Any advice or constructive criticism you have is welcome in the comments, but if your words of wisdom require a massive revision or restart, don’t expect to see them implemented.